Category Archives: Chainsaw Tools

Top 5 underwater chainsaws: You can choose best one now

On Garnigasrl.com, and many others, you’ll find us talking a lot about chainsaws. This might be the types of chainsaws you should buy, or the best of a particular type of chainsaw. But in this article today, we’ll be exploring a particular type of chainsaw that very few people know exist, and even fewer actually talk about. The hydraulic chainsaw. I know that sounds a little bit complicated, but all it is, is a chainsaw that works underwater. Today, we’ll be looking at the 5 best hydraulic chainsaws that are out there today, and going through the benefits of them.

But why on Earth would you ever need a chainsaw that works underwater?

Well, many forests have lakes in them, and sometimes, trees end up falling into these lakes. What do you do then?

There’s no way you can just drag them out, with them being the size that they are. The only way to do it is to cut them up into smaller chunks which are going to be much easier to manage. And once you’ve done this, you can remove the tree chunk by chunk. And with the tree gone, people will be free to enjoy the lake again.

ICS 890F4 Hydraulic 38cm Diamond Chain Saw With FORCE4 Chain

ICS 890F4 Hydraulic 38cm Diamond Chain Saw

The first chainsaw on this list is from the company ICS. It uses a very powerful technology called FORCE4, and it’s been made specifically to be able to cut even the hardest of woods. It has a redesigned near handle to make it easier to handle, as well as making it more durable. To stop the water from taking you off course, it was 3 bubble levels to keep the saw stabilised. The drive sprocket allows you to replace the chain quickly, even when you’re out in the field. As with most of the other chainsaws on this list, this chainsaw is hydraulic powered, meaning that it’s powered by water. Whilst it is designed to be used underwater, it also works well on land, though you will need a water source nearby to be able to use it properly.

ICS 680ES 76.5cc Petrol Concrete Cutting Chain Saw FORCE3 Diamond Chain

ICS 680ES 76.5cc Petrol Concrete Cutting Chain Saw

This next chainsaw is the only one on the list that’s not designed to be used underwater, but don’t be fooled, it works brilliantly for such tasks. It’s actually designed to cut concrete, so you know that it’s got a powerful motor that will be able to get through some of the really tough woods, even when it’s underwater. With it’s a multifunction lever, you can control the choke, run, and stop all from the same switch. The polyester air filter makes it ideal for cutting underwater, and the FORCE3 bar and chain are 14″ and cut gets through almost anything with no issue.

The extended drive sprocket adapter makes assembling the chain easy. And what’s also easy is starting this thing. When you’re using this chainsaw, you will be able to cut through that tree in no time!

ICS 814PRO Hydraulic 33cm Diamond Chain Saw With TwinPRO Chain

ICS 814PRO Hydraulic 33cm Diamond Chain Saw

The third chainsaw on this list, is going to be the final one from ICS. This one is small and compact, making it perfect for places where space is limited. A lot of lakes have a lot of stuff in them, so there isn’t all that much room to move around. If you’re working in such a lake, this saw is one to consider.

Its motor is able to reach speeds of 8800 rpm, and it has a horsepower of 11.5. This means that even when it’s underwater, this saw is going to be able to cut through everything that I need to, and then some. Because of its compact size, this saw would probably be best for either cutting up smaller trees, or for cutting branches off of bigger ones. Both of which are tasks that might be more difficult to do if you’re using a larger saw.

Spitznas CS10 Hydraulic Chainsaw Underwater

Spitznas CS10 Hydraulic Chainsaw Underwater

Fourth, we have the Spitznas CS10. It uses an incredibly powerful motor, and can be fitted with chains ranging from 27cm to 103cm. As with a lot of other chainsaws that you can get nowadays, it also have a chain brake system and integrated pressure control valve, which will help to make it easier for you to use.

What this say prides itself on is that it’s able to cut through greenheart wood, a type of wood that’s used underwater a lot, due to the fact it’s incredibly strong but also waterproof. Due to the fact it’s powered by hydraulic power, there is less chance of you getting injured because of kickback. Overall, it really is a wonderful chainsaw to be using if you ever have to cut anything up underwater.

Stanley CS06 Hydraulic Chainsaw Underwater

Stanley CS06 Hydraulic Chainsaw Underwater

And finally, we have the Stanley CS06 Hydraulic Chainsaw Underwater. There are a lot of similarities between this one and the previous entry. They both have incredibly power motors, which enable them to cut through some very tough woods, they both use hydraulic power, and they’re both remarkably easy to use.

This one has interlocking triggers, handguards, and a low kickback bar. All of which are features, that will increase your chances of being able to work safely. And when you’re using chainsaws, safety has to be a top priority.
This beauty also features a rim sprocket which means that it lasts longer, and will not be breaking when you really don’t need it to. If you have a tree or other piece of wood that’s underwater, and you need it to be cut up, then the Stanley should be on your maybe list.

And there we have my top my underwater chainsaws!

Most of the time, all of your chainsaw usage is going to be on land. And most chainsaw users will never have to cut anything underwater. However, if you are one of those few people who does need to use a chainsaw that will be used underwater then make sure you get the best one for you. This list is the 5 which I believe to be the best on the market. But perhaps by the time you’ve read it, there will be some better ones out there!

Related Contents:

Chainsaw Carving: Is it worth the cost?

What kind of wood is best for chainsaw carving?

Chainsaw Carving: Is it worth the cost?

Are you good with chainsaws? And by good, I mean really really good? Would you be able to turn a log into a bear or dragon or car?

If the answer is yes, then chainsaw carving might be something that you’ll want to get involved with. However, as with most hobbies, it’s not free. In this article, we’ll be talking about the costs of chainsaw carving, as well as some of the ways you might be able to make the money back. After reading this, you will be able to make a better decision as to whether or not you want to take it up for yourself.

If you do decide to make this financial commitment, then I can completely understand why. Not only will you be able to travel, and see some towns, and villages that you wouldn’t otherwise have seen, you’ll also meet loads of amazing people, many of whom, you’ll be able to make their jaws drop, when they see what you’re capable of. It’s hard to put into words the feeling you get when other people are blown away by something you have created. And if you’re an artistic person, you’ll know exactly what I’m talking about.

But what are the costs?

Chainsaw Carving  Price

Chainsaw

The first thing you’ll have to account for is the cost of the chainsaw itself. A chainsaw that is powerful enough, and easy enough to use to be able to do carving will probably cost you at least $200. You can see a list of best chainsaw under $200 here. And that’s not including the cost of maintenance. Garnigasrl want to say thanks to PowerOfTool.com, for listing a lot of great chainsaw.

Of course, many of you reading this will already have a chainsaw that’s perfect for carving. But for those that don’t, this is something you’ll need to think about. Chainsaws are actually a very advanced piece of machinery, and therefore, the good ones have a high price tag.

Logs

Something else you’ll need to think about is the price of the logs themselves. The cheapest way to get these logs is to cut them yourself, but most carvers simply don’t have the time to be doing this. The average log will cost you around $20. But some of them might be slightly more or less depending on what type of wood you’re using.

$20 might not seem like a lot, but when you’re going through so many logs, it is as cost which will definitely add up. If you can cut 5 logs in a day, that’s $100, just on the logs!

Travel

You’ll also need to think about how much this is going to cost you in terms of traveling. Many of these artists, travel all over the country, and therefore won’t be able to go home after every show. You’ll need to find somewhere to stay overnight. One way to save money on this is to do couch surfing, where you can stay with friends and family.

You’ll also need to think about transport! Good luck getting on public transport with a chainsaw.

You will need a car that’s big enough for all of your equipment and your logs.

So how can you make it back?

Tickets

One way to get some of this money back is from selling tickets. Because most people don’t buy the products they see being made, they have to pay a small fee to be able to watch you create the art. Although at fetes, this fee is going to be an entrance fee, and you will receive a very small percentage of all ticket revenue.

Of course, how much money you get from tickets will depend on how popular the event is. This is is going to be a bit of a gamble, as you might make loads, or you might make hardly anything.

Selling

A slightly more profitable way to make money will be from selling your creations. Many people like these wooden sculptures as they will give their garden an extra bit of specialness. And if they can see the skills that you have in creating them, they’ll be more likely to part with more of their hard-earned cash. There are even some chainsaw sculptors who don’t even do live shows at all, and make all of their money purely based on selling their products. However, these people rarely make as much.

Job or side hustle?

If you do decide to take up chainsaw carving and make money out of it, you’ll need to ask yourself whether you want to quit your job and do it full time, or just do it as a side hustle. The choice is yours but both of them have their pros and cons.

If you take it up full time, you need to be 100% sure that you’ll be able to make enough money out it, because if you can’t you’ll be in a tough situation.

If you want to do it as a side hustle, you’ll need to be sure that you’re able, physically, mentally, and time-wise, to do the carving as well as your other job.

Risks and Rewards

Should you quit your job to pursue this full time, then the worst that will happen is that you make no money out of this. When you consider who much it’s going to cost you to get things going, then not making any money will take a big strain on you, and you might even end up in debt.

On the other end of that, the best thing that can happen is that you end up being successful and making lots of money.

If you love creating things, and you love using your chainsaw, then chainsaw carving could be something that you’ll want to consider going into. There are costs along the way. The first one being the cost of the chainsaw, which is likely to be around $200. Then you have the costs of the logs, which are going to be about $20 a log. Then you’ve got the cost of the travel, which can vary.

To make the money back, the two most popular methods are ticket sales and selling the products.

If you want to do it, but not quit your job, then a side hustle is something to consider.

You may like these:

What kind of wood is best for chainsaw carving?

Chainsaw Carving Near Me: What you should know about

Best Chainsaw for Carving

Best Chainsaw for Carving

If you are not into the Lumberjill, Logging, and Lumberjack business, it could be highly desirous to consider going for chainsaws best for carving. This applies mainly to artists and specialists in art who have an interest in developing their skills in carving. Be different as you stand out from those that merely fell trees as well as those that buck trees. The carving chainsaws do not require so much power, all that you need to effective performance is a balance. This article seeks to serve as an eye-opener into the various types of chainsaws best suited for carving, its power needs, the specifications, and features so that you may be guided properly as you choose what suits you.

THE DEWALT DCCS 620 B

This is also known as the compact Cordless Chainsaw Kit. It is battery powered, portable, and convenient but has a characteristic brushless motor, an attribute that ensures it is effective and efficient.  It similarly has a tool-free tensioning technology for ease of maintenance and adjustment thus making this chainsaw one of the most recommended for carving. Thirdly, it has a good power-to-weight ratio and for its light weight, many users go for it because it has a special kit for the storage and usage of its battery. Its producers recommend that you always have an alternative battery.

Best Chainsaw for Carving

Advantages

  • It has a chain brake.
  • Guaranteed quiet operation.
  • Affordability.
  • It has an automatic oiling mechanism.
  • Its tool-free tension manager and adjustments.

Disadvantages

  • It is known to leak often.
  • The oil cap is too tight in most cases.

THE HUSQVARNA 460 RANCHER CHAINSAW

Husqvarna has produced its 460 24-inch rancher chainsaw that is most powerfully known for carving. Moreover, it is gas-powered meaning that it has higher power for operation unlike electric chainsaws with an engine that has a capacity of 60 cc. This chainsaw is mostly used for carving thick wood and it is known to have met the needs of a majority of its users. The 460 rangers are further recommended for hardwoods since it demands less of maintenance, all that you need is a sustained gas supply and the proper oil for fueling.

As far as one is looking for the best chainsaw design to use in wood carving, try the Husqvarna 460 24-inch ranger on both hardwood and softwood. It is a tool that will make you operate comfortably all day long since it is made with an anti-vibration feature that ensures you are not numbed or fatigued in the process. You will not suffer from numbed and tingled hands and for that reason, you are guaranteed of safety as compared to other carving preferences. The air cleaning system has been dubbed as the best for filtering debris, particles, and different forms of foreign particles, something that is bolstered by the Oilers and filters.

THE HUSQVARNA 460 RANCHER CHAINSAW

Advantages

  • The anti-vibration feature
  • It is easy to start
  • Powerful, efficient, and faster.
  • Chain brake system
  • Automatic Oiler features
  • Super Air Cleaning system.

Disadvantages

  • It is expensive
  • Some machines have faulty oilers.

THE BLACK DECKER LCS 1020 CHAINSAW

This type of chainsaw is smaller than the majority of chainsaws considering that unlike the other 24-inch made chainsaw, this one is 10-inch made chainsaw. If all the carving that you are doing is small or necessarily basic, you would be encouraged to go for the Black Decker LCS 1020 Chainsaw.  The Decker’s low kickback makes it very safe for operation, but more importantly, it requires very little maintenance for purposes of producing the required quality and results. Moreover, this chainsaw is battery-powered meaning that it is highly portable and can be used from any location at the home and the larger environment. This chainsaw does not require the application of oil and gas.

THE BLACK DECKER LCS 1020 CHAINSAW

Advantages

  • It has a tool-free tension adjustment capability
  • Low or limited kickback bar and chain
  • Very lightweight
  • Affordable, convenient, and portable
  • Guaranteed quiet operation
  • Oil view window

Disadvantages

  • The battery has a short lifespan
  • Automatic oilers and gas which at times are very faulty.

THE WORX WG 3030 ELECTRIC CHAINSAW

This type of chainsaw is 16-inch and has plenty of features for purposes of trimming trees and curving pieces of wood for purposes of art. It is also tool-free at the knob and for that reason it is easier to loosen the knobs while you are working while at the same time the low kickback ensures that you are secure and safe while operating the machine. In most cases the tip of the chainsaw is applied while performing what is called detailing but experts have established that this type of chainsaw is all that you need for carving. Moreover, the same is lightweight as compared to the gas-powered types which weigh slightly higher pounds.

THE WORX WG 3030 ELECTRIC CHAINSAW

Advantages

  • It has a long warranty
  • Affordable
  • It works with the help of dime tip bars
  • Effective chain brakes
  • Low kickback features
  • Has a tool-free adjustment knob
  • Oil view window for close monitoring

Disadvantages

  • The automatic oiler only requires a thin oil for effective performance
  • It is not balanced

THE MAKITA XCU02PT CHAINSAW KIT

The MAKITA-carving chainsaw is battery-powered by more than 18-volt batteries unlike the old models that were operated with power derived from 20-volt batteries. However small volt capacity, it is considered has been more powerful than the former and has special features that make it more convenient for use. It similarly has a tool-free adjustment knob that prevents fatigue together with an automatic chain brake system. Moreover, being battery-powered and cordless, you have the opportunity to use it around for its convenience and portability. It weighs slightly more than 12 pounds and is thus considered as being slightly heavier than the other machines in the market. It is therefore slightly cumbersome to operate especially for purposes of carving wood, meaning that artists still find this as not being one of the best options for their woodwork.

THE MAKITA XCU02PT CHAINSAW KIT

Advantages

  • Has a tool-free adjustment knob
  • Chain brakes that are efficient and tested
  • It is battery-powered and hence highly portable
  • Guarantees quiet operation
  • The batteries charge quickly

Disadvantages

  • It is considered as being 5 pounds heavier than the normal chainsaws
  • Has  the tendency to leak oil